There are several ways to view data on members using card controls. Card Status Change Exceptions Report As the status to activate/deactivate is sent in online mode only, not in nightly batch maintenance, any exceptions to card status changes will not appear on the standard nightly maintenance report or exception report. To view and work any exceptions to the member card control status changes, view the daily report Daily Member Card Status Exception Report ( LCSALGE) found in CU*Spy. End of   More...

The settings that control how this works are part of Tool 558 NSF/Overdraft Transfer Configuration, on the Overdraft Protection Activation screen. There are four flags: Use Negative Balance Limits for Authorizations and Use Negative Balance Limits for Posting. They control whether the member's ANR limit is added when determining the available balance amount. There are four different combinations of these flags: Authorization Flag Posting Flag Description of Result N N Negative bala  More...

If you press the SHIFT key five times in rapid succession it will ask if you would like to turn on StickyKeys. If you click OK, it will turn on StickyKeys. StickyKeys is an accessibility option in Windows that allows for someone to use the CTRL, ALT or SHIFT keys one key at a time without having to hold the keys down. To turn StickyKeys off: Click on the Start button Click Control Panel If you see “Pick a category” with 10 categories below, click Accessibility Options, and then c  More...

Not every feature that potentially shows account details on an employee's account is governed by the Employee Account Security controls. Apart from technical impracticalities, our basic philosophy has been that employees who are given access to “sensitive” features (like Collections, or posting payrolls, etc.) should be trusted employees, and they should be allowed to use the tools to do their job. If they have to be hobbled or monitored, then perhaps they shouldn’t be tr  More...

IMPORTANT NOTE: With the new look for It’s Me 247 being released during 2021, the “See” option shown on here is temporarily unavailable. Members who had See-only access previously configured will no longer have access. Jump, however, is still available. There are two major points to consider when thinking about allowing members to see information beyond the account to which they are actually logged in. Both extend beyond online banking to consider a financial institution&rs  More...

There is a credit union-level on/off flag where you can disable auto-security as an option for ALL of your employees. To access this, launch Tool #327 Employee Security and use the CU Options button. If auto-security is enabled, anyone can choose to activate it if they wish, either manually by clicking the button at the bottom of the home page, or via their Preferences. As a compromise, if you have some employees who share workstations and therefore need to be able to enter an ID as they acc  More...

The first thing to do is make sure all the cables are connected securely to the printer and the PC. Be sure to note if one of the cables is a network cable. If all of the cables are securely connected and you still cannot print, restart the PC and the printer. If you receive the same error once the printer and PC are back up, there is likely a hardware issue with the printer. If one of the cables that plugs into the printer is a network cable then the Jet Direct card (a network interface   More...

This is how to check your current network settings. The procedure varies depending on your computer's Operating System: For Windows 2000 or XP Right -click on the Start button and select Explore . Scroll to the bottom of the left hand pane, then right -click on My Network Places and select Properties . A new window will pop up and you should see Local Area Connection in the window. Right -click that connection and, again, select Properties . A separate window should pop up and you shoul  More...

Transfer Control means that a member must tell you the account numbers where he or she would like to be able to transfer funds in Online Banking. (Audio Banking does not support Transfer Control lists.) Remember that these are accounts that will receive funds from the member's own account. If only transfer control lists are activated, a member will only choose from a drop-down list of names (not account numbers) from his configured transfer control list. You will need to decide how membe  More...

When you use the filter buttons on the File Maintenance Inquiry dashboard (Tool #159: Audit File Maintenance Inquiry (CUFMNT)), indicators note which programs, fields/columns, and files/tables AuditLink has flagged as “critical” for auditing teams to monitor on a daily basis. You can quickly sort by that indicator and select only those items for a quick scan of maintenance that directly affects member accounts. Below is a listing of these critical items. Columns/Fields Field Why   More...

Using CU*BASE to Comply with New Rules for Tracking Beneficial Ownership FinCEN has issued new rules under the Bank Secrecy Act that require financial institutions to identify and verify the identity of the beneficial owners of all legal entity members (corporations, etc.). Under the final rule, credit unions are required to have written procedures to identify and verify beneficial owners of legal entity members who open new accounts on or after May 11, 2018. In addition to identifying and coll  More...

Note: this procedure also works with Carswell printers. (1) Turn the printer off. (2) Hold the FEED button while turning the printer back on. (3) Continue to hold the FEED button until the error light starts flashing. (4) Clear the paper by pressing the FEED button. If successful, a receipt printer settings page will print. Your printer's memory is now cleared. If this is not successful, please contact the Network Services Help Desk for assistance.

The differences ultimately come down to control and cost. The online ASP system is the fastest, simplest, most inexpensive way to get started with an e-documents strategy for your credit union. With online ASP you offload the back-end service management headaches to CU*Answers. We manage, backup, secure, and patch/upgrade the eDOC servers and databases and these processes fall under our SAS 70 and third party security audits. The online ASP system consists of electronic storage of receipts, loan  More...

When a device first connects to the iSeries, a virtual device is created - consider it a placeholder for that workstation or printer. Only one device can exist for each ID, which is why only one person can sign into a printer at a time. Throughout the virtual devices lifecycle, there are several different statuses that device can be in. Read below for some details! Workstations VARY ON PENDING - this is the default status of the virtual device. This status means the device is ready and wai  More...

There are several configurations that control the member’s ability to set up and maintain Automated Funds Transfer (AFTs) online. Does your credit union's Personal Internet Branch configuration allow the maintenance of AFTs? Are AFTs configured to show in online banking? Does the member's PIB configuration allow maintenance of AFTs in online banking? For existing AFTs: Is the record locked to prevent changes in online banking? 1. Does your credit union's Personal Internet Bran  More...

This comes from the Workstation Device Configuration in CU*BASE. To view or change this: Launch Tool #326 CU Hardware Configuration Select Terminal/Workstation In the list of workstations, locate the ID of the workstation you are looking up and double click on it (or just type the ID and press Enter) This will open up the terminal's configuration in CU*BASE. In the middle is the list of default printers where your documents will print: General Printer - this will be the printer to which a  More...

In a nutshell, you will set up a Membership Designation Code for Representative Payee, with the label for primary name set to Beneficiary and the label for the joint owner name set to Rep Payee. Then the procedure is to open the membership in the beneficiary's name and SSN, then put the representative payee's SSN as the joint owner (type J secondary name link). TIPS: Remember that in CU*BASE the words joint owner simply are used to describe a particular record type in the Se  More...

This is an issue when trying to access the IBM iAccess Key Database that holds all the certificate information necessary for using SSL. Make sure you've run the updates.cubase.org for enabling encryption as well as the everyone permission to ensure all users can access the key database file. Next you will want to access the IBM iAccess for Windows either through Control Panel or the Start Menu and go under the Secure Sockets option. Select 'Use default key database' if not already se  More...

In this particular member's situation there was no activity in either October or November that triggered a statement. The credit union's quarterly (and year-end) statements are configured to produce a statement for every member, regardless of activity level, but monthly statements are more restrictive in an attempt to save postage costs, and not every member gets a statement every month. NOTE: CU*BASE statements have a considerable number of configuration options that allow credit unio  More...

There are many, many components in the infrastructure that protects your member data, from passwords and daily backups to production redundancy and full-blown DR/BR plans. One important piece of that puzzle involves the protections we put in place to control data moving between the System i and a local workstation. Years ago no one ever imagined an employee popping a thousand member records onto a thumb drive and heading out the door. Today we have entire teams and sophisticated tools to prev  More...

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} When launching a print sessio  More...

Source of Receipt (SOR) is the paperwork that accompanies the checks to the Check Processor. It is the documented proof of when and from whom the checks were received. SOR provides the ABA# of the bank the checks are received from, the date of the cashletter, the amount of the bundle the check was in, the position of the check in the bundle (checks before after), and the tracer number assigned to the check. On the form you'll see a couple of abbreviations: IB stands for Item Before that   More...

These symbols print when the printer doesn't know what graphic or font to use for the logo, signature, or MICR line. There are a few possible causes: Is this a new printer? If this is a new printer, the first thing to consider is whether the other printers at the credit union use Check Secure devices. Check Secure devices are no longer sold and are not compatible with new printer hardware. To transition from Check Secure devices to the new software based check printing methods, contact CU  More...

Here are seven things to review if you are trying to research why a loan did not report to the credit bureau. Look to see if the loan is flagged not to report to the credit bureau: Access Tool #20 Update Account Information (shortcut: acct) for the account and click the Credit Reporting Info button. The Report to credit bureau flag must be checked. Look at the Credit Report History located in Loan Account Inquiry via the Delinquency window (F23 or click the lookup button next to the Deli  More...

Make sure that drivers for the printer are loaded on the PC on which you are building the session. Test the drivers by printing a windows test page unless you are using a thermal receipt printer. DO NOT SEND WINDOWS TEST PAGES TO THERMAL RECEIPT PRINTERS! Once you know the printer is set up correctly, then perform the following steps: 1) Go to Start>Programs>IBM Client Access Express>Emulator>Start or Configure Session. 2) Select Configure. 3) Set the System Name to WESCPROD.  More...